LAMONA LAM1750 Bedienungsanleitung Seite 6

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 24
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 5
Keep the minimum distance from other appliances and units.
Always take care when moving the appliance as it is heavy. Always use safety gloves
and enclosed footwear.
Seal the cut surfaces with a sealant to prevent moisture to cause swelling.
Protect the bottom of the appliance from steam and moisture.
Do not install the appliance adjacent to a door or under a window. This prevents hot
cookware falling from the appliance when the door or the window is opened.
If the appliance is installed above drawers make sure that the space, between the
bottom of the appliance and the upper drawer, is sufficient for air circulation.
The bottom of the appliance can get hot. Make sure to install a separation panel made
from plywood, kitchen carcass material or other non-flammable materials under the
appliance to prevent access to the bottom.
Electrical Connection
WARNING! Risk of fire and electric shock.
All electrical connections should be made by a qualified electrician.
The appliance must be earthed.
Before carrying out any operation make sure that the appliance is disconnected from the
power supply.
Make sure that the parameters on the rating plate are compatible with the electrical
ratings of the mains power supply.
Make sure the appliance is installed correctly. Loose and incorrect electricity mains
cable or plug (if applicable) can make the terminal become too hot.
Use the correct electricity mains cable.
Do not let the electricity mains cable tangle.
Make sure that a shock protection is installed.
Use the strain relief clamp on the cable.
Make sure the mains cable or plug (if applicable) does not touch the hot appliance or
hot cookware, when you connect the appliance to the near sockets.
Do not use multi-plug adapters and extension cables.
Make sure not to cause damage to the mains plug (if applicable) or to the mains cable.
Contact our Authorised Service Centre or an electrician to change a damaged mains
cable.
The shock protection of live and insulated parts must be fastened in such a way that it
cannot be removed without tools.
Connect the mains plug to the mains socket only at the end of the installation. Make
sure that there is access to the mains plug after the installation.
If the mains socket is loose, do not connect the mains plug.
Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses
removed from the holder), earth leakage trips and contactors.
The electrical installation must have an isolation device which lets you disconnect the
appliance from the mains at all poles. The isolation device must have a contact opening
width of minimum 3 mm.
Use
WARNING! Risk of injury, burns and electric shock.
6
Seitenansicht 5
1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare