LAMONA LAM4602 Bedienungsanleitung PDF herunterladen (Seite 26)

5. Put the door with the outer side down

on a soft cloth on a stable surface. This

is to prevent scratches.

6. Hold the door trim (B) on the top edge

of the door at the two sides and push

inwards to release the clip seal.

1

2

B

CAUTION! Rough handling of

the glass, especially around the

edges of the front panel, can

cause the glass to break.

7.

Pull the door trim to the front to remove

it.

8.

Hold the door glass panels on their top

edge one by one and pull them up out

of the guide.

9. Clean the glass panel with water and

soap. Dry the glass panel carefully.

When the cleaning is completed, install the

glass panels and the door. Do the above

steps in the opposite sequence. Install the

smaller panel first, then the larger.

Replacing the lamp

Put a cloth on the bottom of the interior of

the appliance. It prevents damage to the

lamp glass cover and the cavity.

WARNING! Danger of

electrocution! Disconnect the

fuse before you replace the

lamp.

The lamp and the lamp glass

cover can be hot.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box or

deactivate the circuit breaker.

The back lamp

The lamp glass cover is at the

back of the cavity.

1.

Turn the lamp glass cover

counterclockwise to remove it.

2.

Clean the glass cover.

3.

Replace the oven lamp with a suitable

300 °C heat-resistant oven lamp.

Use the same oven lamp type.

4.

Install the glass cover.

The side lamp

1. Remove the left shelf support to get

access to the lamp.

2. Use a narrow, blunt object (e.g. a

teaspoon) to remove the glass cover.

3. Clean the glass cover.

4. Replace the lamp with a suitable 300 °C

heat-resistant lamp.

5. Install the glass cover.

6. Install the left shelf support.

26

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare